Hioki Clamp on Sensor 9668

1000A Current Output Sensor for Measuring Load Current with Models 8205-10 and 8206-10 Micro HiLoggers

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9669 is a 1000A AC current output clamp sensor for measuring load current and commercial power lines with the 8205-10 and 8206-10 Micro HiLoggers.

Note: Compatible only with the 8205-10 and 8206-10 Micro HiLoggers; not compatible with the discontinued 8205 and 8206 or data loggers.

40Hz to 1kHz bandwidth
• Primary: AC 1000A
• Secondary: AC 1000mA
• Max. continuous input: AC 1000A
• φ55mm (2.17in) dia.
• Not compatible with Model 3636-20

Basic specifications (Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times)

Rated primary current AC 1000 A
Max. allowable input (45-66 Hz) AC 1000 A continuous
Rated output current AC 1000 mA
Amplitude accuracy ±3.0 % rdg. ±0.03 % f.s. (50/60 Hz)
Phase accuracy No provision (cannot use with the electric power meter)
Frequency characteristics 40 Hz to 1 kHz: ± 3.0%
(Add to amplitude accuracy)
Max. rated voltage to earth AC 600 V rms (Insulated wire)
Core diameter φ 55 mm (2.17 in), or 80 mm (3.15 in) × 20 mm (0.79 in) busbar
Dimensions and mass 99.5 mm (3.92 in) W × 188 mm (7.40 in) H × 42 mm (1.65 in) D, 550 g (19.4 oz), Cord length: 3 m (9.84 ft), Output terminal: exclusive 2P plug
Accessories Instruction manual ×1

Location

Ask about this product