Fluke 8808A 120V, 5.5 Digital Bench Multimeter

Manufacturing test, R&D, development and service applications demand performance and flexibility from a bench meter. The Fluke 8808A 120V, 5.5 Digital Bench Multimeter delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency —all at superior accuracy and resolution with a basic VDC accuracy of 0.015 %.

The Fluke 8808A 5.5 digit multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. The Fluke 8808/A is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do.

Six setup buttons on the Fluke 8808-A front panel operate like a car radio's station pre-sets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It's that easy!

 

The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement.

Measure sensitive leakage current
Typical multimeters use a shunt method to measure current, creating a measurement burden voltage that increases the error in low current measurements. This makes it difficult, if not impossible, to perform tasks such as determining the true leakage current on a battery-powered device while it is powered down, or measuring small currents in sensitive circuits. The Fluke 8808A is the only multimeter in its class to use a low-impedance operational amplifier and current-to-voltage conversion technique to eliminate the burden voltage and measure sensitive low currents. In this special mode, the Fluke 8808 A Digital Benchmeter can accurately measure small currents with a resolution of up to 100 nA.

Perform routine manufacturing functional tests with consistency
Six setup buttons on the Fluke 8808A front panel operate like a car radio's station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. Operators no longer need to press multiple buttons to make a measurement.

Eliminate production mistakes
Whether you are performing functional tests or making critical measurements on test points, using the limit compare mode with pass/fail indicators eliminates mistakes, especially those where results are "on the edge." The Fluke 8808A display has built-in enunciators that clearly show whether a test passes or fails. The pass/fail indicators take the guesswork out of testing: the result is either within limits or it's out!

Perform 4-wire measurements with only two leads
Patented split terminal jacks for 2x4 Ohms function allow you to perform precise 4-wire low ohms measurements with only two leads instead of four. Optional test lead accessories are available to enable you to establish a 4-wire connection even in tight spaces or on surface mount devices.

Fluke 8808A Specifications
Measurement Function
[Accuracy ± (% of reading + % of range)]
DC Voltage Ranges 200mV to 1000V
Max Resolution 1uV
Accuracy 0.015 + 0.003
AC Voltage Ranges 200mV to 750V
Max Resolution 1uV
Accuracy 0.2 + 0.05
Frequency 20Hz to 100 KHz
DC Amps Ranges 200 µA to 10 A
Max Resolution 1nA
Accuracy 0.02 + 0.005
AC Amps Ranges 20 mA to 10 A
Max Resolution 100 nA
Accuracy 0.3 +0.06
Frequency 20 Hz to 2 KHz
Resistance
2x4 Wire Yes
Ranges 200 Ω to 100 MΩ
Max. Resolution 1 mΩ
Accuracy 0.02 + 0.003
Frequency / Period
Ranges 20 Hz to 1 MHz (Frequency Only)
Maximum Resolution 0.1 mHz
Accuracy 0.01%
Continuity/Diode Test Yes
Math Functions
dB/dBm Yes
Advanced Functions
Limit Test Yes
Input / Output
Interfaces RS-232, USB with Optional Adapter
Programming
Languages/Modes
Simplified ASCII, Fluke 45
Continuity/Diode Test Yes
General Specifications
Display VFD multi segment
Resolution 5.5 Digits
Weight 2.1 kg (4.6 lbs)
Size
(Height x Weight x Depth)
3.46 in x 8.56 in x 11.7 in
(88 mm x 217 mm x 297 mm)
Safety Designed to comply with EN 61010-1:2001
ANSI/ISA 61010-1 (S82.02.01):2004
UL 61010-1:2004
CAN/CSA C22.2 No. 61010.1:2004
Warranty One Year

Location

Ask about this product