Features
* 200MHz Bandwidth, Dual Channel, Delayed Sweep
* Auto Set
* Built-in 6 Digits Counter
* Cursor Readout with 7 Measurements
* 10 Sets Memory for Front Panel Setting Save & Recall
* TV-Line Selection (NTSC, PAL, SECAM)
* Panel Setup Lock of Digital-Control Functions
* Buzzer Alarm
* LED Indicators
Description :
The GOS-6200 Analog Oscilloscope satisfies the massive needs for diverse professional applications up to 200MHz. Embedded with Delay Sweep and Hold Off features, the GOS-6200 is capable of measuring sophisticated signals. The Cursor Readout with 7 measurements, Panel Setup Save/Recall, and the built-in 6 Digit Universal Counter all make waveform observation and measurement easier, faster and more accurate. The advanced Time Base Auto Range function acquires waveforms only with one push of a button. The Counter function, 10 memory settings, and advanced Auto functions are among some of the extra benefits available in GOS-6200. |
|
Specification :
CRT |
|||||||||||||||||||||
Type | 6-inch rectangular type with internal graticule; 0%, 10%, 90% and 100% markers 8 x 10 div (1 div = 1 cm) |
||||||||||||||||||||
Accelerating Potential | 14 kV approx. | ||||||||||||||||||||
Illumination | Continuously adjustable | ||||||||||||||||||||
Z-axis input | Coupling : DC Sensitivity: 5V or more Maximum input voltage : 30V (DC + AC peak) at 1kHz or less Bandwidth : DC ~ 5 MHz |
||||||||||||||||||||
VERTICAL SYSTEM |
|||||||||||||||||||||
Sensitivity | 2mV~5V/div, 11 step in 1-2-5 sequence | ||||||||||||||||||||
Sensitivity Accuracy | ≦3% (5div at the center of display) | ||||||||||||||||||||
Vernier Vertical Sensitivity | Continuously variable to 1/2.5 or less of panel-indicated value | ||||||||||||||||||||
Bandwidth(-3dB) | DC~200MHz (5mV/div:DC~150MHz) ; (2mV/div:DC~20MHz) | ||||||||||||||||||||
Rise Time | 1.75ns (5mV/div:2.33ns, 2mV/div:17.5ns) | ||||||||||||||||||||
Signal Delay | Leading edge can be monitored | ||||||||||||||||||||
Max. Input Voltage | 400V(DC+AC peak) at 1kHz or less | ||||||||||||||||||||
Input Coupling | AC, DC, GND | ||||||||||||||||||||
Input Impedance | 1MΩ ±2% // approx. 25pF | ||||||||||||||||||||
Vertical Mode | CH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV. | ||||||||||||||||||||
Bandwidth Limited | 20MHz | ||||||||||||||||||||
Common-Mode Rejection Ratio | 50:1 or better at 50kHz | ||||||||||||||||||||
Dynamic Range | 8 div at 100MHz; 5div at 200MHz | ||||||||||||||||||||
HORIZONTAL SYSTEM |
|||||||||||||||||||||
Horizontal Modes | MAIN(A), ALT, DELAY(B) | ||||||||||||||||||||
A(main) Sweep Time | 20ns~0.5s/div, continuously variable (UNCAL) | ||||||||||||||||||||
B(delay) Sweep Time | 20ns~50ms/div | ||||||||||||||||||||
Accuracy | ±3% ( ±5% at x 10 MAG) | ||||||||||||||||||||
Sweep Magnification | x 10 (maximum sweep time 2ns/div) | ||||||||||||||||||||
Hold Off Time | Variable | ||||||||||||||||||||
Delay Time | 1μs~5s | ||||||||||||||||||||
Delay Jitter | Better than 1:20000 | ||||||||||||||||||||
Alternate Separation | Variable | ||||||||||||||||||||
TRIGGER |
|||||||||||||||||||||
Trigger Modes | AUTO, NORM,TV | ||||||||||||||||||||
Trigger Source | CH1, CH2, LINE, EXT, EXT/10 | ||||||||||||||||||||
Trigger Coupling | AC, DC, HFR, LFR, NR | ||||||||||||||||||||
Trigger Slope | "+" or "-" polarity or TVsync polarity | ||||||||||||||||||||
Trigger Sensitivity |
|
||||||||||||||||||||
Trigger Level Range | INT: ±4div or more; EXT: ±0.4V or more; EXT/10: ±4V or more | ||||||||||||||||||||
TV Triggering |
Mode:TV-V, TV-H, TV-LINE | ||||||||||||||||||||
TV-Line Selection |
|
||||||||||||||||||||
Max. External Input Voltage | 400V(DC+AC peak) at 1kHz | ||||||||||||||||||||
External Input Impedance | 1MΩ±5% // approx.25pF | ||||||||||||||||||||
X-Y OPERATION |
|||||||||||||||||||||
Mode |
X-axis: selectable CH1, EXT, EXT/10 |
||||||||||||||||||||
Sensitivity Accuracy | 2mV~5V/div±3% EXT : 0.1V/div±5% EXT/10 : 1V/div±5% |
||||||||||||||||||||
X-axis Bandwidth | DC~500kHz(-3dB) | ||||||||||||||||||||
Phase Error | 3° or less from DC~50kHz | ||||||||||||||||||||
OUTPUT SIGNAL |
|||||||||||||||||||||
Ch1 Signal Output | Voltage: approx. 25mV/div into 50Ω Frequency response : DC ~ 10MHz |
||||||||||||||||||||
Calibrator Output | 1kHz Square wave, 2Vpp±2% | ||||||||||||||||||||
CURSOR READOUT FUNCTION |
|||||||||||||||||||||
Cursor Measurement Function |
ΔV, ΔV%, ΔVdB, ΔT, 1/ ΔT, ΔT%, Δθ | ||||||||||||||||||||
Cursor Resolution | 1/100 DIV | ||||||||||||||||||||
Effective Cursor Range | Vertical: ±3div ; Horizontal: ±4 div | ||||||||||||||||||||
Panel Setting Display | Vertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GND Horizontal: s/div(MTB, DTB), UNCAL, x 10MAG, Delay time, Hold-off Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y, lock, save/recall MEM 0-9 |
||||||||||||||||||||
AUTO MEASUREMENT FUNCTION |
|||||||||||||||||||||
Parameter Function | FREQ, PERIOD,±WIDTH,±DUTY (+ or - polarity selected by trigger slope) | ||||||||||||||||||||
Display Digits | Max. 6-digits, decimal | ||||||||||||||||||||
Frequency Range | 50Hz ~ 200MHz | ||||||||||||||||||||
Accuracy | 1kHz ~ 200MHz : ±0.01% ; 50Hz ~ 1kHz : ±0.05% | ||||||||||||||||||||
Measuring Sensitivity | > 2 div (Measuring source selected from CH1 and Ch2 as synchronous signal sources) | ||||||||||||||||||||
SPECIAL FUNCTION |
|||||||||||||||||||||
Auto Set | Input Channel : CH1, CH2 Frequency Response 50Hz ~ 50MHz |
||||||||||||||||||||
Panel Setting Save & Recall | 10 sets | ||||||||||||||||||||
Panel Setups Lock | Provided | ||||||||||||||||||||
POWER SOURCE | |||||||||||||||||||||
AC 100V/120V/230V±10% , 50/60Hz | |||||||||||||||||||||
User manual x 1 Power cord x 1 GTP-250A: 250MHz Probe (10:1/1:1) Switchable Passive Probe (One per channel) |
|||||||||||||||||||||
DIMENSIONS & WEIGHT | |||||||||||||||||||||
310(W) x 150(H) x 470(D) mm Approx. 9kg |
Acccessories :
User manual x 1
Power cord x 1
GTP-250A: 250MHz Probe (10:1/1:1) Switchable Passive Probe (One per channel)
Optional Accessories
GTL-110 Test lead, BNC-BNC heads
GTC-001 Instrument cart, 450(W) x 430(D)mm (120V input socket)
GTC-002 Instrument cart, 330(W) x 430(D)mm (120V input socket)
Orddering Information:
GOS-6200 200MHz cursor readout analog oscilloscope