Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style)

The Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style) improves the efficiency of fiber certification with a 3 seconds, two fibers at both wavelengths. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. Copper certification and Wi-Fi Analysis and Ethernet troubleshooting modules are also available. Analyze test results and create professional test reports using LinkWare Management Software.

The Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style) helps cabling professionals accomplish more than ever. It's all about accurate, error-free certification, making jobs easier to manage and certifying fiber optic cabling to industry standards, faster. CertiFiber Pro OLTS complies with all applicable cabling standards, which call out the new Encircled Flux launch condition requirements for optical sources. It's not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects.

Specifications
Power Meter Specifications
Input Connector Interchangeable connector adapter (LC standard, SC, ST and FC optional)
Detector Type InGaAs
Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)
Power Measurement Uncertainty < +/- 5% +/- 32 pW
Measurement Linearity < ± 0.1 dB
Re-calibration Period 1 year
Power Meter Specifications
Testing Speeds (excludes referencing times) Smart Remote mode < 3 seconds (2 wavelengths, one direction, auto wavelength detection)
Far End Source mode ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection)
Loopback mode ≤ 2 seconds (2 wavelengths, one direction auto wavelength detection)
Input/Output Connectors Interchangeable connector adapter (LC standard, SC, ST and FC optional)
Launch Condition Encircled Flux compliant to TIA-526-14-B, ISO/IEC 14763-3 and IEC 61280-4-1
Fiber Types Tested singlemode
Source Type and Wavelengths Fabry-Perot laser diode 1310 nm ± 20 nm 1550 nm ± 30 nm
Maximum Length Measurement 130 km
Length Measurement Accuracy ± 1.5 m plus ± 1 % of length
Output Power (Nominal) ≥ -4 dBm
Output Power Stability ± 0.1 dB over 8 hours ± 0.08 dB over 15 minutes
Source Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
Power Measurement Range 0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other wavelengths)
Power Measurement Uncertainty < +/- 5% +/- 32 pW
Measurement Linearity < ± 0.1 dB
Re-calibration Period 1 year
Visual Fault Locator (VFL)
Output Power >-5 dBm
<0 dBm
SMF-28 singlemode fiber
Continuous wave
SC/UPC connector
Operating Wavelength 650 nm nominal
Output Modes Continuous wave
Pulsed mode (2 Hz to 3 Hz blink frequency)
Connector Adapter 2.5 mm universal
Laser Safety Class II CDRH
Over operating temperature range

Location

Ask about this product