Madgetech

  • Filter
Category: Mounting Kits
Created on: 01 February 2014

The WM-300 is a wall-mounting station that is built for use with the Cryo-Temp, TransiTempII, or the TransiTempII-RH. It can be mounted using the adhesive tape along the back or it can be screwed to a wall or any flat surface.

Category: Mounting Kits
Created on: 01 February 2014

Wall mount for the Therm•A•lert, Therm•A•lert-RH or Therm•A•lert-P data loggers.

Category: Mounting Kits
Created on: 01 February 2014

The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert, then tighten the six screws again and it’s ready to use.

Category: Mounting Kits
Created on: 01 February 2014

The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use, simply unscrew the 6 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert and tighten the six screws again, and it’s ready to use.

Category: Mounting Kits
Created on: 01 February 2014

Magnetic mounting kit for the Shock101, UltraShock, and TSR101.

Category: Mounting Kits
Created on: 01 February 2014

Magnetic mounting kit for the Shock101-EB, UltraShock-EB, and TSR101-EB.

Category: Mounting Kits
Created on: 01 February 2014

The MagMount-1 is a magnetic holder for use with the PR140, HiTemp140 series and 1000 series data loggers. The device can be placed in environments from -80°C to +80°C, making it ideal for use in refrigerators, freezers, and incubators.

Category: Mounting Kits
Created on: 01 February 2014

The LUER-FITTING-F is a 1/8” NPT to female luer lock adapter. It can be used with the PR140 data logger with NPT Port. The LUER-FITTING-F can easily be screwed into the 1/8” NPT female port on the data logger. This rugged adapter is made of 316 stainless steel construction and can withstand harsh environments, such as steam sterilization cycles.